【スパコン】年度末保守でのソフトウェアアップデートのお知らせ / Notification of the Software Update
平成27年3月27日からの年度末保守において,ソフトウェアのアップデートを実施しました.
新しく導入したバージョンの情報とともに,環境設定ファイルの変更についても記載しましたのでご確認ください.
- ソフトウェアの新バージョン導入
- module環境設定時のデフォルトバージョンの変更
- MPIライブラリデフォルトバージョン変更に伴う注意事項 (システムE)
--
The Supercomputer Systems have been updated upon the completion of the year-end maintenance work started on March 27, 2015.
This update includes the followings:
- New Versions of the Software
- Changes in Default Versions When Configuring Modules
- Important Note in Response to Changes in Default Versions of MPI Library (System E)
1. ソフトウェアの新バージョン導入 / New Versions of the Software
今回の保守で導入した,ソフトウェアの新バージョンは下表に記載した通りとなります.
なお,各ソフトウェアの利用方法については,以下のWebページをご覧ください.
--
Those listed below are the new versions of the software installed during the maintenance.
For details on how to use each software, visit the following webpages:
- Compilers and Libraries http://web.kudpc.kyoto-u.ac.jp/manual/en/compiler
- Application Software http://web.kudpc.kyoto-u.ac.jp/manual/en/application
ソフトウェア名 Software | 新しく公開したバージョン New Version | 対応するmoduleファイル Modulefile |
---|---|---|
システムA / System A | ||
Intel compiler | 14.0.5 | intel/14.0.5 |
15.0.2 | intel/15.0.2 | |
PGI compiler | 14.10 | pgi/14.10 |
15.3 | pgi/15.3 | |
Intel MKL library | 11.1.5 | mkl/11.1.5 |
11.2.2 | mkl/11.2.2 | |
Totalview | 8.15.0 | xt-totalview/8.15.0 |
システムB,C / System B,C | ||
Intel compiler | 14.0.5 | intel/14.0.5 |
15.0.2 | intel/15.0.2 | |
PGI compiler | 14.10 | pgi/14.10 |
15.3 | pgi/15.3 | |
CUDA compiler | 6.5.14 | cuda/6.5.14 |
Intel MPI library | 5.0.3 | impi/5.0.3 |
Intel MKL library | 11.1.5 | mkl/11.1.5 |
11.2.2 | mkl/11.2.2 | |
IMSL library | 7.1 | fnl710-intel |
tecplot※ | 2015 R1 | tecplot360/2015R1 |
Mathematica | 10.0.2 | mathematica/10.0.1 |
MATLAB | 2015a | matlab/R2015a |
LS-DYNA | R8.0.0 | ls-dyna/ls971-8.0.0 |
ANSYS | 16.0 | ansys/v160 |
Totalview | 8.15.0 | totalview/8.15.0 |
システムD / System D | ||
Cray compiler | 8.3.9 | cce/8.3.9 |
Intel compiler | 14.0.5 | intel/14.0.5 |
15.0.2 | intel/15.0.2 | |
PGI compiler | 14.10 | pgi/14.10 |
15.3 | pgi/15.3 | |
Cray MPI library | 7.1.3 | cray-mpich/7.1.3 |
Cray LibSci library | 13.0.3 | cray-libsci/13.0.3 |
Intel MKL library | 11.1.5 | mkl/11.1.5 |
11.2.2 | mkl/11.2.2 | |
IMSL library | 7.1 | fnl710-intel fnl710-cce |
adams | 2014 | adams/2014.1 |
AVS | 8.2 | avs/8.2 |
ENVI | 5.2 | envi/52 |
IDL | 8.4 | idl/84 |
tecplot※ | 2013 R1 | tecplot360/2013R1 |
Maple | 18 | maple/18 |
Marc | 2014 | marc/2014 |
Marc Mentat | 2014 | marc_mentat/2014 |
Mathematica | 10.0.2 | mathematica/10.0.2 |
MATLAB | 2015a | matlab/R2015a |
MSC Nastran | 2014 | nastran/20140 |
LS-DYNA | R8.0.0 | ls-dyna/ls971-8.0.0 |
ANSYS | 14.5 | ansys/v145 |
Totalview | 8.15.0 | xt-totalview/8.15.0 |
システムE / System E | ||
Cray compiler | 8.3.9 | cce/8.3.9 |
Intel compiler | 14.0.5 | intel/14.0.5 |
15.0.2 | intel/15.0.2 | |
Cray MPI library | 7.1.3 | cray-mpich/7.1.3 |
Cray LibSci library | 13.0.3 | cray-libsci/13.0.3 |
Intel MKL library | 11.1.5 | mkl/11.1.5 |
11.2.2 | mkl/11.2.2 | |
Totalview | 8.15.0 | xt-totalview/8.15.0 |
※最新バージョン利用へのライセンス変更に伴い,古いバージョンがご利用頂けません
*The previous versions are no longer available in response to the newly-released latest version of the licenses in the systems.
2. module環境設定時のデフォルトバージョンの変更 / Changes in Default Versions When Configuring Modules
moduleコマンドによる環境設定時のデフォルトバージョンを,以下の通り変更しました.
moduleファイル名のスラッシュ(/)とバージョンを省略してロードすると,デフォルトのバージョンが読み込まれます. デフォルト以外のバージョンを利用したい場合は,スラッシュとバージョン番号を明記してロードしてください.
Modulesを使用した環境設定の詳細については,以下のWebページをご覧ください.
--
Those listed below are the default versions when configuring using the module command.
If you load without using the slash (/) and the version number of module files, the default version will be set. Also, if you use the software version besides default, specify the slash and the version number when loading.
For details on the configuration using Modules, visit the following webpages:
ソフトウェア名 Software | デフォルトバージョン(変更後) Default Version (Available as of Apr. 2, 2015) | デフォルトバージョン(変更前) Default Version (Previously Available) |
---|---|---|
システムA / System A | ||
PGI compiler | pgi/15.3 | pgi/13.10 |
Totalview | xt-totalview/8.15.0 | xt-totalview/8.13.0 |
システムB,C / System B,C | ||
PGI compiler | pgi/15.3 | pgi/13.10 |
CUDA compiler | cuda/6.5.14 | cuda/5.5.22 |
IMSL library | imsl/fnl710-intel | imsl/fnl701-intel |
adams | adams/2014.1 | adams/2013 |
AVS | avs/8.2 | avs/8.1 |
ENVI | envi/52 | envi/50sp2 |
IDL | idl/84 | idl/82sp2 |
LS-DYNA | ls-dyna/ls971-8.0.0 | ls-dyna/ls971-7.0.0 |
tecplot | tecplot360/2015R1 | tecplot360/2013R1 |
Maple | maple/18 | maple/17 |
Mathematica | mathematica/10.0.2 | mathematica/9.0.1 |
MSC Nastran | nastran/20140 | nastran/20131 |
Marc/Marc Mentat | marc/2014 | marc/2013 |
marc_mentat/2014 | marc_mentat/2013 | |
Patran | patran/2014 | patran/2013 |
ANSYS | ansys/v160 | ansys/v150 |
Totalview | totalview/8.15.0 | totalview/8.13.0 |
システムD / System D | ||
Cray compiler | cce/8.3.9 | cce/8.3.0 |
Intel compiler | intel/14.0.5 | intel/14.0.3 |
PGI compiler | pgi/15.3 | pgi/14.3 |
Cray MPI library | cray-mpich/7.1.3 | cray-mpich/7.0.0 |
Cray LibSci library | cray-libsci/13.0.3 | cray-libsci/13.0.0 |
Intel MKL library | mkl/11.1.5 | mkl/11.1.3 |
IMSL library | imsl/fnl710-cce | imsl/fnl701-intel |
AVS | avs/8.2 | avs/8.1 |
ENVI | envi/52 | envi/51 |
IDL | idl/84 | idl/83 |
tecplot | tecplot360/2015R1 | tecplot360/2013R1 |
Maple | maple/18 | maple/17 |
Mathematica | mathematica/10.0.2 | mathematica/9.0.1/td> |
MATLAB | matlab/R2015a | matlab/R2014a |
MSC Nastran | nastran/20140 | nastran/20131 |
Adams | adams/2014.1 | adams/2013.2 |
Marc/Marc Mentat | marc/2014 | marc/2013.1 |
marc_mentat/2014 | marc_mentat/2013.1 | |
LS-DYNA | ls-dyna/ls971-8.0.0 | ls-dyna/ls971-7.0.0 |
ANSYS | ansys/v160 | ansys/v150 |
Totalview | xt-totalview/8.15.0 | xt-totalview/8.13.0 |
システムE / System E | ||
Cray compiler | cce/8.3.9 | cce/8.2.5 |
Intel compiler | intel/14.0.5 | intel/14.0.3 |
Cray MPI library | cray-mpich/7.1.3 | cray-mpich/6.3.0 |
Cray LibSci library | cray-libsci/13.0.3 | cray-libsci/12.2.0 |
Intel MKL library | mkl/11.1.5 | mkl/11.1.2 |
Totalview | xt-totalview/8.15.0 | xt-totalview/8.13.0 |
3. MPIライブラリデフォルトバージョン変更に伴う注意事項 (システムE)/ Important Note in Response to Changes in Default Versions of MPI Library (System E)
年度末保守において,システムEのMPIライブラリ(cray-mpich)のデフォルトバージョンを7.1.3に変更を行いました.バージョン7系と6系では互換性が無いため,プログラムを再コンパイルして頂く必要があります.
--
Upon completion of the year-end maintenance work, the default version of MPI Library for the System E has been updated to the version 7.1.3. Accordingly, re-compilation of the program is required due to incompatibility between the series of version 7 and 6.
お問い合わせ | 京都大学 企画・情報部 情報基盤課 スーパーコンピューティング掛 E-mail:consult 画像
![]() お問い合わせフォーム |