1. ホーム
  2. インフォメーション
  3. お知らせ
  4. 【スパコン】定期保守でのソフトウェアアップデートのお知らせ / Notification of the Software Update

コンテンツ

お知らせ

【スパコン】定期保守でのソフトウェアアップデートのお知らせ / Notification of the Software Update

2018年4月5日(木曜日)掲載


平成30年3月27日からの定期保守において,システムA/B/Cのソフトウェアのアップデートを実施しました.

  1. ソフトウェアの新バージョン導入
  2. module環境設定時のデフォルトバージョンの変更
  3. [システムA] OSのアップデートについて
  4. [システムB/C] 計算ノードからの外部接続について
  5. ストレージシステムの一部更新について
  6. ENVIライセンスサービスについて
  7. スパコンマニュアルのURL変更について

--

The Supercomputer Systems have been updated upon the completion of the maintenance work started on March 27, 2018.

This update includes the followings:

  1. New Versions of the Software
  2. Changes in Default Versions When Configuring Modules
  3. [System A] OS update
  4. [System B/C] Internet connection from the computing nodes
  5. Replacement of the storage system
  6. Changes in ENVI licensing service
  7. Changes in the URL of supercomputer manual site

1. ソフトウェアの新バージョン導入 / New Versions of the Software

今回の保守で導入した,ソフトウェアの新バージョンは下表に記載した通りとなります.

なお,各ソフトウェアの利用方法については,以下のWebページをご覧ください.

--

Those listed below are the new versions of the software installed during the maintenance.

For details on how to use each software, visit the following webpages:

ソフトウェア名
Software
新しく公開したバージョン
New Version
対応するmoduleファイル
Modulefile
システムA / System A
Cray compiler 8.6.5 cce/8.6.5
Intel compiler 17.0.6.256 Intel/17.0.6.256
18.0.2.199 intel/18.0.2.199
PGI compiler 17.10.0 pgi/17.10.0
18.3.0 pgi/18.3.0
GNU compiler 7.3.0 gcc/7.3.0
Cray LibSci 18.03.1 cray-libsci/18.03.1
Cray MPI 7.7.0 cray-mpich/7.7.0
CrayPat 7.0.0 perftools-base/7.0.0
Gaussian16 B01 gaussian16/b01
システムB,C / System B,C
Cray Compiler 8.6.5 cce/8.6.5
Intel compiler 17.0.6.256 Intel/17.0.6.256
18.0.2.199 intel/18.0.2.199
PGI compiler 17.10.0 pgi/17.10.0
18.3.0 pgi/18.3.0
Intel MPI 2018.2 impi/2018.2
Totalview 2018.0.5 totalview/2018.0.5
Adams 2017.2 adams/2017.2
ENVI 5.5 envi/5.5
IDL 8.7 idl/8.7
Gaussian16 B01 gaussian16/b01
Marc 2017.1 marc/2017.1
Patran 2017.3 classic patran/201703_classic
Tecplot360 2018R1 tecplot360/2018R1

注:Intel Compiler 2017.0.6 のMPIライブラリは Intel MPI 2017.4 となります

2. module環境設定時のデフォルトバージョンの変更 / Changes in Default Versions When Configuring Modules

moduleコマンドによる環境設定時のデフォルトバージョンを,以下の通り変更しました.

moduleファイル名のスラッシュ(/)とバージョンを省略してロードすると,デフォルトのバージョンが読み込まれます. デフォルト以外のバージョンを利用したい場合は,スラッシュとバージョン番号を明記してロードしてください.

Modulesを使用した環境設定の詳細については,以下のWebページをご覧ください.

--

Those listed below are the default versions when configuring using the module command.

If you load without using the slash (/) and the version number of module files, the default version will be set. Also, if you use the software version besides default, specify the slash and the version number when loading.

For details on the configuration using Modules, visit the following webpages:

ソフトウェア名
Software
デフォルトバージョン(変更後)
Default Version (Available Hereafter)
デフォルトバージョン(変更前)
Default Version (Previously Available)
システムA / System A
Cray compiler cce/8.6.5 cce/8.5.8
Intel compiler intel/17.0.6.256 intel/17.0.2.174
PGI compiler pgi/17.10.0 pgi/17.3.0
GNU compiler gcc/7.3.0 gcc/6.3.0
Cray MPI cray-mpich/7.7.0 cray-mpich/7.5.3
Cray Libsci cray-libsci/18.03.1 cray-libsci/16.11.1
CrayPat perftools/7.0.0 perftools/6.4.6
Arm Forge allinea_forge/18.0.1 allinea_forge/7.0
Gaussian16 gaussian16/b01 gaussian16/a03
システムB,C / System B,C
Cray compiler cce/8.6.5 cce/8.5.5
Intel compiler intel/17.0.6.256 intel/17.0.2.174
PGI compiler pgi/17.10.0 pgi/17.3.0
Intel MPI library impi/2017.4 impi/2017.2
Totalview totalview/2018.0.5 totalview/2017.0.12
NAG(SMP) nag_smp/26_intel nag_smp/24_intel
Arm Forge allinea_forge/18.0.1 allinea_forge/7.0
AVS avs/8.4 avs/8.3
Adams adams/2017.2 adams/2017.1
ENVI envi/5.5 envi/5.3
IDL idl/8.7 idl/8.5
Gaussian16 gaussian16/b01 gaussian16/a03
LS-DYNA ls-dyna/ls971-10.0.0 ls-dyna/ls971-9.0.1
Maple maple/2017 maple/2016
Marc/Mentat marc/2017.1 marc/2016
tecplot360 tecplot360/2018R1 tecplot360/2017R1
MATLAB matlab/R2017b matlab/R2016b
Nastran nastran/20180 nastran/20170

3. [System A] OSアップデートについて / OS update

システムAのOSをCLE6.0.UP04(SLES12SP2)からCLE6.0.UP06(SLES12SP3)にアップデートしました。
Linuxカーネル及びOSに付属するソフトウェアがバージョンアップされていますが、既存のコンパイル済みのプログラムの動作に影響はありません。

--

The OS on system A has been updated from CLE6.0.UP04(SLES12SP2) to CLE6.0.UP06(SLES12SP3).
Some software bundled with OS and its Linux kernel have been updated, which don't affect user program compiled before this OS update.

4. [システムB/C] 計算ノードからの外部接続について / Internet connection from the computing nodes

システムB/C、および専用クラスタの計算ノードから外部ネットワークへ直接接続できるようになりました。
会話型実行またはバッチジョブ中に、外部との通信が可能になります。
外部と接続する際に相手に認識されるIPアドレスは、133.3.51.9となります。
なお、外部から計算ノードへの直接接続はできません。

--

The direct connection from the computing nodes to the internet is available.
Users can connect to the internet during the execution of batch job or interactive execution.
The IP address for the internet connetion is 133.3.51.9.
Please note that you cannot connect from the internet to the compute nodes.

5. ストレージシステムの一部更新について / Partial replacement of the storage system

/home1, /LARGE2, /LARGE3 に対応するストレージ(ExaScaler SFA12K)を、ExaScaler SFA14Kに更新しました。
これに伴い、システムEのユーザのホームであった /home1 はファイル移行用に残しておりますが、将来的に廃止致します。
/home1 にファイルを残している方は、2018年度中にバックアップをお願いします。

--

The ExaScaler SFA12K storage system, which provides /home1, /LARGE2, and /LARGE3, has been replaced with SFA14K.
Due to that, /home1, which is the home directory for system E, will be discontinued in the future.
If you have necessary files in /home1, please copy them to other space by the end of 2018.

6. ENVIライセンスサービスについて / Changes in ENVI licensing service

2018年度より,ライセンスサービスでENVI 5.5が利用可能になります.
5.5では、これまでの5.3以前と利用にあたっての設定手順が一部変わります.
詳細は2018年度のライセンスサービスの利用承認メールに添付される説明書をご覧ください.

なお,ベンダのサポート形態が最新版および一世代前のみのサポートとなったため,5.3以前のバージョンは2018年8月で提供終了となる予定です.
5.3以前をお使いのユーザの方におかれましては,お手数ですが,提供終了までにENVI 5.5への移行をお願いいたします.

--

ENVI 5.5 is now available with licensing service.
The setup procedure for 5.5 is partially different from that of 5.3.
For details, please see the manual which is attached to the approval email for licensing service of annual year 2018.

Note: The vendor company of ENVI has changed the support policy and currently supports only the newest version and the previous version, so our licensing service for ENVI 5.3 and earlier will end on August 2018.
Please migrate to the version 5.5 by August.

7. スパコンマニュアルのURL変更について / Changes in the URL of supercomputer manual site

スパコンマニュアルのURLが一部変更になります。

旧:http://web.kudpc.kyoto-u.ac.jp/manual-new

新:http://web.kudpc.kyoto-u.ac.jp/manual

--

The URL of supercomputer manual site has been changed.

Previous: http://web.kudpc.kyoto-u.ac.jp/manual-new

Hereafter: http://web.kudpc.kyoto-u.ac.jp/manual


お問い合わせ 京都大学 企画・情報部 情報基盤課 スーパーコンピューティング掛
E-mail:consultkudpc.kyoto-u.ac.jp
お問い合わせフォーム

お知らせトップへ戻る

 

Copyright © Institute for Information Management and Communication, Kyoto University, all rights reserved.